41 m7r series 5.0 volt hcmos/ttl compatible surface mount oscillators these are non-pll based high frequency oscillators intended for applications that require low phase jitter. for frequencies 80.000 mhz and below, please see the m7s series. pin connections *consult factory for availability. 1. symmetry is measured at 1.4 v with ttl load, and at 50% vdd with hcmos load. 2. ttl load - see load circuit diagram #1 on page 92. hcmos load - see load circuit diagram #2 on page 92. 3. rise/fall times are measured between 0.5 v and 2.4 v with ttl load, and between 10% vdd and 90% vdd with hcmos load.
|